Schaffner Product catalog

  • Product Catalog

    Shaping electrical power

    Product Catalog

    Just the information you need by creating your own product catalog

Schaffner product catalogs

Create your own product catalog

Choose either a predefined catalog, select products from a product line or compile your individual catalog with the Drag'n'Drop function.

Optionally you can personalize the cover page of the catalog. To do that please tick the box on the left hand side and fill in the requested information.

Settings

Available datasheets

My catalog

Sort by

110 products were found.
RT series: Current-compensated Chokes

RT series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 6 to 20 A
  • Up to 600 VAC and VDC
  • 2- and 3-wire configurations
  • Horizontal and vertical PCB mounting types
  • Ruggedized saturation and thermal behavior
  • Open construction for forced and convection cooling
  • Straightforward pin-out for easy PCB design
Operating frequency : 0 to 400 Hz
Rated current : 6 to 20 A
Attenuation performance : very high
FN 3442: Ecosine evo, 60 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3442

Ecosine evo, 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier without DC-link choke and thyristor rectifier
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
RWK 3044: 3-phase Line Reactor to reduce mains disturbances

(UL recognized up to 640 A)

RWK 3044

3-phase Line Reactor to reduce mains disturbances

  • Reactors
  •  » AC Line Reactors
  • 4% 3-phase line reactor for 400 V network
  • Reducing harmonics on the mains side
  • Reducing commutation notches
  • Limiting inrush current
  • Reliable and economical solution for mitigating mains disturbances
Impedance : 4% @ 400 V, 50 Hz and rated rms current
Climatic category : 40/100/21 (IEC 60068-1)

RWK 3062: 3-phase Line Reactor to reduce mains disturbances

(UL recognized up to 280 A)

RWK 3062

3-phase Line Reactor to reduce mains disturbances

  • Reactors
  •  » AC Line Reactors
  • 2% 3-phase line reactor for 690 V network
  • Reducing harmonics on the mains side
  • Reducing commutation notches
  • Limiting inrush current
  • Reliable and economical solution for mitigating mains disturbances
Impedance : 2% @ 690 V, 50 Hz and rated rms current
Climatic category : 40/100/21 (IEC 60068-1)

ecosine active sync: Active Harmonic Filter ecosine active sync

ecosine active sync

Active Harmonic Filter ecosine active sync

  • Ecosine active
  •  »
  • Most effective harmonic mitigation up to the 50th order, parameter setting for even and odd harmonics
  • Compact active harmonic filter for 3-phase loads with and without neutral wire
  • <5% THDi achievable even on most complex mixed loads and changing load profiles
  • New modular design with intelligent system approach offering tailored solutions for different applications and customers
  • 3-Level IGBT inverter topology for reduced power losses
  • Extended temperature range of modules up to 50°C
  • Ultra-fast and dynamic reactive power compensation (inductive and capacitive)
  • Load balancing and unloading of neutral wires
  • Flicker compensation (if caused by reactive power)
  • Compliance with IEEE 519, EN 61000-3-12 and other power quality standards
  • User-friendly, easy to install and maintain
FN 3441: Ecosine evo, 50 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3441

Ecosine evo, 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier with DC-link choke
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use

FN 3451: Ecosine evo, 50 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3451

Ecosine evo, 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier with DC-link choke
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3453: Ecosine evo, 60 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3453

Ecosine evo, 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier with DC-link choke
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3440: Ecosine evo, 50 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3440

Ecosine evo, 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier without DC-link choke and thyristor rectifier
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3450: Ecosine evo, 50 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3450

Ecosine evo, 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier without DC-link choke and thyristor rectifier
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3452: Ecosine evo, 60 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3452

Ecosine evo, 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier without DC-link choke and thyristor rectifier
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 2211 HV and FN 2210 HV: Compact high current DC EMC/EMI filter

FN 2211 HV and FN 2210 HV

Compact high current DC EMC/EMI filter

  • EMC/EMI Products
  •  » DC Filters
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent premature panel aging
  • Helps to meet international EMC regulations
  • Most compact standard solution in the industry
  • FN 2210 HV without Cy capacitors to ground
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
Attenuation performance : standard
FN 2090: Multi-stage AC/DC EMI Filter with Excellent Attenuation Performance

FN 2090

Multi-stage AC/DC EMI Filter with Excellent Attenuation Performance

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 30 A
  • Two-stage filter
  • Very high differential and common-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional overvoltage protection (Z type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.08 mA
Attenuation performance : very high
Leakage current : 0.5 to 1.02 mA
FN 2010: General Purpose AC/DC EMI Filter

FN 2010

General Purpose AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Rated currents from 1 to 60 A
  • General purpose filtering performance
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional DC optimized versions
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Leakage current : 0.74 mA
Attenuation performance : standard
FN 3287/FN 3288: Smallest book-style EMC/RFI Filter for Inverter and Power Drive Systems

600 VAC

FN 3287/FN 3288

Smallest book-style EMC/RFI Filter for Inverter and Power Drive Systems

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Standard and high performance EMC solution
  • Footprint space-saving book-style housing
  • Solid safety connector blocks
  • Standard attenuation performance FN 3287
  • High attenuation performance FN 3288
  • HV versions for 690 VAC applications
  • HVIT- and IT versions for IT distribution networks
  • Versions with low leakage current
Attenuation performance : high

FN 2580: EMC/EMI line filter for lighting equipment

FN 2580

EMC/EMI line filter for lighting equipment

  • EMC/EMI Products
  •  » Single-Phase Filters
  • Voltage rating up to 350 VAC
  • Current rating 2 A, 5 A and 8 A
  • Offers attenuation fitting to lighting application
  • Compact, space-saving design
  • Cable outlets with enhanced length give freedom for flexible installation
Operating frequency : DC to 60 Hz

Attenuation performance : high
FN 9262: High Performance Power Entry Module with Fuses

FN 9262

High Performance Power Entry Module with Fuses

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 10 A
  • Integrated dual fuse holder
  • Optional reduced leakage current versions (A/B type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)
  • High attenuation performance
Voltage : ≤ 250 V
Operating frequency : DC to 400 Hz
Rated current : 1 to 10 A
Attenuation performance : high

FN 2020: General Purpose AC/DC EMI Filter

FN 2020

General Purpose AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Rated currents from 1 to 60 A
  • High differential-mode attenuation
  • Optional medical version (B type)
  • Optional safety version (A type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Leakage current : 0.74 mA
Attenuation performance : standard
RC series: Current-compensated Chokes

RC series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 0.25 to 0.7 A
  • DC to 400 Hz frequency
  • 100 kHz to 3 MHz common-mode resonance frequency
  • Dual-choke configurations
  • Multiple PCB-mounting options
Inductance : 4.7 to 47 mH
Rated current : 0.25 to 0.7 A
Frequency (DC) : 400 Hz
Attenuation performance : very high

FN 2030: General Purpose AC/DC EMI Filter with High Attenuation Performance

FN 2030

General Purpose AC/DC EMI Filter with High Attenuation Performance

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Rated currents from 1 to 30 A
  • High performance filter attenuation
  • High differential-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional overvoltage protection (Z type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Attenuation performance : standard
Leakage current : 0.34 to 0.87 mA
FN 6840: LCL Filter for Active Front End Motor Drives and Active Infeed Converter

FN 6840

LCL Filter for Active Front End Motor Drives and Active Infeed Converter

  • EMC/EMI Products
  •  » LCL Filters
  • Line side LCL filtering for AFE and AIC applications
  • Mandatory interface to connect the AFE or AIC-system to the grid
  • Helps to improve the power quality on the grid side
  • Reduces ripple currents and voltage disortions
  • All LCL components in one package
  • Compact design and ready to be connected
Nominal line frequency : 50/60 Hz
Switching frequency fPWM : min. 3 kHz up to max. 10 kHz
Rated current : 25 to 380 A
Rated inductance L2 (inverter/converter side) : 8% @ 400V, 50 Hz and rated current
Rated inductance L1 (grid/line side) : 4% @ 400V, 50 Hz and rated current

FN 9255 E: High Performance dual-stage IEC C14 inlet filter with earth line choke

FN 9255 E

High Performance dual-stage IEC C14 inlet filter with earth line choke

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Excellent performance/size ratio
  • Earth line choke Version
  • IEC C14 inlet acc. IEC 60320-1
  • Medical versions (B type) acc. to IEC/EN 60601-1
  • Snap-in and rear mount versions (S and M type)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Rated current : 2 to 15 A
Leakage current (B types) : 0 A
FN 9255: High performance dual-stage IEC C14 and C20 inlet filter

FN 9255

High performance dual-stage IEC C14 and C20 inlet filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 20 A
  • Excellent performance/size ratio
  • IEC C14 or C20 inlet acc. IEC 60320-1
  • Medical versions (B type) acc. to IEC/EN 60601-1
  • Snap-in and rear mount versions (S and M type)
  • Earth line choke version (Refer to FN9255 E)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Leakage current : 500 µA
Rated current : 2 to 20 A
Leakage current (B types) : 0 A
FN 2060: Multi-stage General Purpose AC/DC EMI Filter

FN 2060

Multi-stage General Purpose AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 30 A
  • High differential and common-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Leakage current : 0.734 to 0.867 mA
Attenuation performance : standard
FN 409: 75 VDC Input PCB Filter

FN 409

75 VDC Input PCB Filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 3 to 13 A, 75 VDC
  • Very compact PCB-mounting design
  • Exceptional attenuation performance
  • High frequency noise compression
IF 13: Power Cord Input EMC Filter IF 13

IF 13

Power Cord Input EMC Filter IF 13

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » Power Cords with Input EMC Filter
  • High frequency attenuation
  • Shielding and ferrite cable
  • Easy to integrate in any design
  • Retrofit for any IEC C14 inlet
  • Rated current up to 10A
  • Various powerline plugs for international usage
IL 13P Rewireable Angled IEC C13 Locking Connector: IL 13P IEC C13 Rewireable Angled Connectors with Locking System

IL 13P Rewireable Angled IEC C13 Locking Connector

IL 13P IEC C13 Rewireable Angled Connectors with Locking System

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » Power Cords with Locking System
  • Locking system for standardized IEC C14 inlet filter
  • No accidental disconnection
  • Rated current up to 15 A
  • Fits any Schaffner IEC C14 inlet filter
  • Retrofit for any IEC C14 inlet
  • Various power line plugs for international usage

Color: black
Connector line side: C14; CEE7/VII; BS 1363
Connector load side: C13 with IEC lock
Frequency: 50/60 Hz
Voltage: ≤ 250 V

RS series: Differential-mode chokes

RS series

Differential-mode chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Differential-mode Chokes
  • Rated currents from 0.5 to 4 A
  • DC to 400 Hz frequency
  • 500 kHz to 60 MHz differential-mode resonance frequency
  • 40 to 450 microjoules storage
  • Multiple PCB-mounting options
Inductance : 0.003 to 4 mH
Rated current : 0.5 to 4 A
Frequency (DC) : 400 Hz
Attenuation performance : very high
FN 2070: Multi-stage Performance AC/DC EMI Filter

FN 2070

Multi-stage Performance AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 36 A
  • High differential and common-mode attenuation
  • High frequency attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Attenuation performance : high
Leakage current : 0.734 to 0.867 mA
FN 2080: Multi-stage High Performance AC/DC EMI Filter

FN 2080

Multi-stage High Performance AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 16 A
  • High differential and common-mode attenuation
  • Good low frequency attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Leakage current : 0.734 mA
Attenuation performance : high
FN 2200: EMC/EMI Filter for PV Inverters

(600 VDC) (850 VDC)

FN 2200

EMC/EMI Filter for PV Inverters

  • EMC/EMI Products
  •  » DC Filters
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent pre-mature panel aging because of HF leakage currents
  • Helps to meet international EMC regulations for the entire PV system
  • Most compact standard solution in the industry, optionally available without capacitors to ground (B types)
  • New: up to 2300 A
Attenuation performance : very high
Rated current : 25 to 2300 A
Voltage : ≤ 1200 V
FN 2211 and FN 2210: Compact high current DC EMC/EMI filter

FN 2211 and FN 2210

Compact high current DC EMC/EMI filter

  • EMC/EMI Products
  •  » DC Filters
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent premature panel aging
  • Helps to meet international EMC regulations
  • Most compact standard solution in the industry
  • FN 2210 without Cy capacitors to ground
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
Attenuation performance : standard
FN 2410 and FN 2412: EMC/RFI Filters for Industrial Electronics

FN 2410 and FN 2412

EMC/RFI Filters for Industrial Electronics

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Excellent filter performance for applications with high interference levels
  • Filters for two-phase supply up to 2x 520 VAC (P-P) available
  • Fast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45 A
  • Industrial grade terminal blocks for unsurpassed electrical safety
Operating frequency : DC to 400 Hz
Leakage current : 3.4 mA
Attenuation performance : very high
FN 2450: Safe and ergonomic EMC/EMI filter with very low leakage current

FN 2450

Safe and ergonomic EMC/EMI filter with very low leakage current

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Light weight plastic enclosure design
  • Very low filter leakage current
  • Hinged safety covers
  • Embedded filter terminals
  • Different performance levels
  • Environmental friendly design without potting compound
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Attenuation performance : high
FN 3025/FN 3026: DIN-Rail EMC/RFI Filter with Minimum Leakage Current

Design protected by European patent (EP 1727280)

FN 3025/FN 3026

DIN-Rail EMC/RFI Filter with Minimum Leakage Current

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Compact state-of-the-art filter concept
  • Light weight plastic enclosure design
  • Minimized filter leakage current
  • Hinged safety covers
  • Revolutionary embedded filter terminals
  • Chassis or DIN-rail mounting option
  • Selectable performance level
  • Environmental friendly design without potting compound
Operating frequency : DC to 60 Hz
Rated current : 10 to 50 A
Attenuation performance : standard
Voltage : ≤ 520 V
Leakage current : 0.4 to 2.5 mA
Motor power : 5.5 to 30 kW
FN 3100: Bookstyle EMC/EMI Filter for Motor Drives

(FN 3100 up to 150 A)

FN 3100

Bookstyle EMC/EMI Filter for Motor Drives

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Exceptional broadband attenuation performance from 10 kHz up to 30 MHz
  • Slim and user-friendly book-style design with touch-safe terminal blocks for minimum space and maximum safety
  • Enables compliance with Class B limits
Operating frequency : DC to 60 Hz
Rated current : 35 to 300 A
Attenuation performance : very high
Voltage : ≤ 520 V
Leakage current : 48.9 to 71.5 mA
Motor power : 22 to 160 kW
FN 3120: High-Performance EMC/RFI Filter for Drives

FN 3120

High-Performance EMC/RFI Filter for Drives

  • EMC/EMI Products
  •  » 3-Phase Filters
  • High performance filter for extremely noisy applications
  • Significantly improves the reliability and immunity of installations
  • Enables compliance with Class B limits even with very long cables
Operating frequency : DC to 60 Hz
Rated current : 25 to 230 A
Leakage current : 97.9 mA
Attenuation performance : very high
Voltage : ≤ 520 V
Motor power : 15 to 132 kW
FN 3256: Compact Line Filter for Industrial Machinery/Equipment

FN 3256

Compact Line Filter for Industrial Machinery/Equipment

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Compact, space-saving design, optimized for industrial machinery
  • Combines high attenuation performance with low leakage current
  • Performance according to the machine tool standard EN 50370-1
  • Increases also the immunity if operated directly on the mains input
Operating frequency : DC to 60 Hz
Attenuation performance : high
Leakage current : < 1 mA
Rated current : 8 to 160 A
Voltage : ≤ 520 V
FN 3258: Ultra-compact EMC/RFI Filter for Motor Drives Applications

FN 3258

Ultra-compact EMC/RFI Filter for Motor Drives Applications

  • EMC/EMI Products
  •  » 3-Phase Filters
  • New: solid safety connector blocks available for the whole range
  • Exceptional attenuation performance from 150 kHz to 30 MHz
  • Excellent saturation resistance up to 50 m cable length
  • Most compact and slim filter design in its class
Operating frequency : DC to 60 Hz
Rated current : 7 to 180 A
Attenuation performance : very high
Voltage : ≤ 520 V
Motor power : 4 to 110 kW
Leakage current : 33 mA
FN 3268: EMC/EMI Filter for Installations with Residual Current Device (RCD)

FN 3268

EMC/EMI Filter for Installations with Residual Current Device (RCD)

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Full functionality with RCDs according to IEC 61008 and new VDE 0664-110*
  • Compatible with 30 mA RCDs up to 30 m motor cable for electric shock protection according to IEC 61008
  • Compatible with 300 mA RCDs up to 100 m motor cable for fire protection according to IEC 60364-4-42 (VDE 0100-482)
Operating frequency : DC to 60 Hz
Rated current : 7 to 180 A
Attenuation performance : very high
Voltage : ≤ 520 V
Leakage current : 4.5 to 37 mA
Motor power : 4 to 110 kW
FN 3270: Compact EMC/RFI Filter for Industrial Motor Drive Applications

FN 3270

Compact EMC/RFI Filter for Industrial Motor Drive Applications

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Very compact and light weight design requiring minimum space
  • Easy, time-saving installation and contacting
  • Protective covers as optional accessory available
  • Attenuation performance according to EN 61800-3/A11
Operating frequency : DC to 60 Hz
Rated current : 10 to 1000 A
Attenuation performance : standard
Voltage : ≤ 520 V
Leakage current : 26.4 to 59.5 mA
Motor power : 5.5 to 560 kW
FN 3280: High-end Line Filter for Machinery/Equipment

FN 3280

High-end Line Filter for Machinery/Equipment

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Now available up to 600 A
  • Compact, space-saving design, optimized for industrial machinery
  • Combines exceptional attenuation with low leakage current
  • Suitable for machines in mixed/domestic environments (Class A/B)
  • Increases also the immunity if operated directly on the mains input
Operating frequency : DC to 60 Hz
Leakage current : < 1 mA
Attenuation performance : very high
Rated current : 8 to 600 A
Voltage : ≤ 520 V
FN 3311/FN 3310: Compact power line AC EMC/EMI filter

FN 3311/FN 3310

Compact power line AC EMC/EMI filter

  • EMC/EMI Products
  •  » 3-Phase Filters
  • High current 3-phase filter up to 2300 A
  • Extremely compact and light weight design
  • Minimum installation foot print
  • Performance optimised for standard purpose applications
  • FN 3310 series without Cy capacitors to ground
  • FN 3311 IT versions for use in IT power networks
Operating frequency : DC to 60 Hz
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
Attenuation performance : standard
FN 3311 HV and FN 3310 HV: Compact 690 VAC power line EMC/EMI filter

FN 3311 HV and FN 3310 HV

Compact 690 VAC power line EMC/EMI filter

  • EMC/EMI Products
  •  » 3-Phase Filters
  • High current 3-phase filter up to 2300 A
  • Extremely compact and light weight design
  • Minimum installation foot print
  • Performance optimised for standard purpose applications
  • FN 3310 HV series without Cy capacitors to ground
  • FN 3311 HVIT versions for use in IT power networks
Operating frequency : DC to 60 Hz
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
Attenuation performance : standard
FN 3359: High-current EMC/RFI Filter

UL up to 1000A: 600/400 VAC; ENEC up to 1600A: 690/400 VAC

FN 3359

High-current EMC/RFI Filter

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Off-the-shelf high power filter for rated currents up to 2500 A
  • HV versions applicable for IT power networks
  • Busbars for convenient and universal electrical connection
  • Protective plastic covers optionally available for unsurpassed safety
Operating frequency : DC to 60 Hz
Rated current : 150 to 2500 A
Leakage current : < 6 mA
Attenuation performance : very high
Voltage : ≤ 690 V
Motor power : 75 to 2000 kW
FN 9222: General Performance IEC Inlet Filter

(CQC except HI-types)

FN 9222

General Performance IEC Inlet Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 20 A
  • Excellent performance/size ratio
  • Optional medical versions (B type) according to IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
  • Optional overvoltage protection (Z type)
Operating frequency : DC to 400 Hz

Attenuation performance : standard
Voltage : ≤ 250 V
Leakage current (B types) : 2 µA
Leakage current : 373 µA
Rated current : 1 to 20 A
FN 9222 E: General Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9222 E

General Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Excellent performance/size ratio
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Optional wide mounting flanges
Operating frequency : DC to 400 Hz

Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 1 to 15 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 9226: HF Performance EMC/EMI Filter

FN 9226

HF Performance EMC/EMI Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 10 A
  • Faston connection
  • Optional PCB through hole connection
  • Good HF coupling to the equipment housing
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
Attenuation performance : standard
FN 9233: High Performance EMC/EMI Filter

(CQC except HI-types)

FN 9233

High Performance EMC/EMI Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Excellent attenuation performance
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Operating frequency : DC to 400 Hz

Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 1 to 15 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 9233 E: High Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9233 E

High Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Excellent attenuation performance
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Rated current : 1 to 15 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 9244: Excellent Performance EMC/EMI Filter

(CQC except HI-types)

FN 9244

Excellent Performance EMC/EMI Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Superior attenuation performance
  • Optional earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Leakage current (B types) : 2 µA
Leakage current : 373 µA
Rated current : 1 to 15 A
FN 9244 E: Excellent Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9244 E

Excellent Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Superior attenuation performance
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Leakage current (B types) : 2 µA
Leakage current : 373 µA
Rated current : 1 to 15 A
FN 9246: High Performance IEC Inlet Filter

FN 9246

High Performance IEC Inlet Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 20 A
  • Optional medical versions (B type)
  • Rear mounting
  • Excellant attenuation in the lower
  • frequency range
Operating frequency : DC to 400 Hz
Attenuation performance : high
Voltage : ≤ 250 V
Rated current : 1 to 20 A
Leakage current (B types) : 2 µA
Leakage current : 373 to 797 µA
FN 9260: General Purpose Power Entry Module with Fuses

FN 9260

General Purpose Power Entry Module with Fuses

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 10 A
  • Integrated single/dual fuse holder
  • Optional reduced leakage current versions (A/B type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)
  • Good attenuation performance
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current : 373 µA

FN 9264: General Purpose Power Entry Module with Switch

FN 9264

General Purpose Power Entry Module with Switch

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 10 A
  • High quality 2-pole rocker switch
  • Optional reduced leakage current versions (A/B type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)
  • Good attenuation performance
Operating frequency : DC to 400 Hz
Attenuation performance : high
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current : 373 µA

FN 9280: Ultra Compact and Versatile Filtered Power Entry Module

(CQC except HI-types; Patent US 20110227692/US 8766761; CN ZL201080069589.0)

FN 9280

Ultra Compact and Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Single stage filter
  • Ultra compact design
  • Rated currents up to 10 A
  • dual-fuse holder
  • Fuses Ø5x20 mm
  • 2-pole rocker switch
  • Good attenuation performance
  • Faston or spring cage terminals
Voltage : ≤ 250 V
Operating frequency : DC to 400 Hz
Attenuation performance : high
Rated current : 1 to 10 A
Leakage current standard : < 500 µA
Leakage current medical (B types) : < 5 µA

FN 9290: Ultra Compact and Versatile Filtered Power Entry Module

(CQC except HI-types; Patent US 20110227692/US 8766761; CN ZL201080069589.0)

FN 9290

Ultra Compact and Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Dual stage filter
  • Ultra compact design
  • Rated currents up to 10 A
  • Dual fuse holder
  • 2-pole rocker switch
  • Good attenuation performance
  • Faston or spring cage terminals
Voltage : ≤ 250 V
Operating frequency : DC to 400 Hz
Attenuation performance : very high
Rated current : 1 to 10 A
Leakage current standard : < 500 µA
Leakage current medical (B types) : < 5 µA
IL 13, 13 P, 19: Power Cord with Locking System

IL 13, 13 P, 19

Power Cord with Locking System

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » Power Cords with Locking System
  • Locking system for standardized IEC C14/C20 inlet filter
  • No accidental disconnection
  • Rated current up to 10 A (C13 plug), up to 15 A (C13P plug), and up to 16 A (C19 plug)
  • Fits any Schaffner IEC C14/C20 inlet filter
  • Retrofit for any IEC C14/C20 inlet
  • Various power line plugs for international usage
Attenuation performance : standard
Color : black

Connector line side : C14; CEE7/VII; BS 1363; NEMA 5-15; SEV 1011; JIS 8303
Connector load side : C13 with IEC lock
Frequency : 50/60 Hz
Length : 2 m
Operating frequency : DC to 60 Hz
Rated Current : 10 A
Voltage : ≤ 250 V
RN series: Current-compensated Chokes

RN series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 0.3 to 10 A
  • DC to 400 Hz frequency
  • 100 kHz to 3 MHz common-mode resonance frequency
  • Dual-choke configurations
  • Multiple PCB-mounting options
Inductance : 0.4 to 100 mH
Rated current : 0.3 to 10 A
Frequency (DC) : 1 kHz
Attenuation performance : very high

RI series: Saturating Chokes

RI series

Saturating Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Saturating Chokes
  • Rated currents from 1.5 to 25 A
  • Up to 500 VAC operating voltage
  • DC to 1 kHz frequency
  • Single or dual-choke configurations
Frequency (DC) : 1 kHz
Voltage : ≤ 500 V
Rated current : 1.5 to 25 A
Attenuation performance : very high
RD series: Current-compensated Chokes

RD series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 6 to 64 A
  • Up to 600 VAC or 850 VDC
  • DC to 400 Hz frequencies
  • Dual, triple and quad-choke configurations
Operating frequency : DC to 400 Hz
Rated current : 6 to 64 A
Inductance : 0.2 to 25 mH
Attenuation performance : very high
RB series: Current-compensated Chokes

RB series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 16 to 50 A
  • Up to 600 VAC or 1000 VDC
  • 2- and 3-wire configurations
  • Horizontal and vertical PCB mounting types
  • Ruggedized saturation and thermal behavior
  • Open construction for forced and convection cooling
  • Straightforward pin-out for easy PCB design
Operating frequency : DC to 400 Hz
Rated current : 16 to 50 A
Inductance : 0.2 to 3 mH
Attenuation performance : very high
IT series with single secondary winding: Pulse Transformer with Single Secondary Winding

IT series with single secondary winding

Pulse Transformer with Single Secondary Winding

  • EMC/EMI Products
  •  » Pulse Transformers
  • Galvanic separation of drive and power circuit
  • Voltage resistance up to 8 kV
  • Ignition current up to 3 A
  • Turns ratio up to 3:1
Ignition currents : 0.1 to 3 A
Rise time : 0.3 to 2.3 µs
Frequency : ≤ 40000 Hz
Attenuation performance : very high
Operating frequency : DC to 40000 Hz
IT series with double secondary winding: Pulse Transformer with Double Secondary Winding

IT series with double secondary winding

Pulse Transformer with Double Secondary Winding

  • EMC/EMI Products
  •  » Pulse Transformers
  • Galvanic separation of drive and power circuit
  • Voltage resistance up to 4 kV
  • Ignition current up to 1 A
  • Turns ratio up to 3:1:1
Ignition currents : 0.1 to 1 A
Rise time : 0.4 to 4 µs
Frequency : ≤ 40000 Hz
Attenuation performance : very high
Operating frequency : DC to 40000 Hz
EV/EH series: Common-mode Suppression Chokes

EV/EH series

Common-mode Suppression Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents up to 5 A
  • Broadband attenuation characteristics
  • Low magnetic leakage flux
  • UL rated materials
  • RoHS compliant
Operating frequency : DC to 400 Hz
Voltage : ≤ 250 V
Rated current : 0.3 to 5 A
Inductance : 0.5 to 90 mH
Attenuation performance : very high
FN 258: Book-style EMC/RFI Filter for Inverters and Power Drive Systems

UL/CSA: FN 258 up to 180 A (ex. -180-07)

FN 258

Book-style EMC/RFI Filter for Inverters and Power Drive Systems

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Industry standard EMC solution for three-phase PDS filtering
  • Slim space-saving book-style housing
  • Solid safety connector blocks or optional wire output connections
  • Excellent attenuation performance
  • HV versions for up to 690 VAC
  • HVIT versions for IT distribution networks
  • P/L versions with low leakage current
Rated current : 7 to 250 A
Operating frequency : DC to 60 Hz
Voltage : ≤ 690 V
Motor power : 4 to 132 kW
Leakage current : 0.7 to 30 mA
Attenuation performance : very high
FN 280: Compact filtered power entry module

(CQC except HI-types)

FN 280

Compact filtered power entry module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Complies with IEC/EN 60601-1
  • Rated currents up to 10 A
  • Single or dual-fuse holder
  • Fuses Ø5 x 20 mm
  • 2-pole rocker switch
  • General purpose application
  • Optional earth line choke (E type)
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Leakage current : 373 µA
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current (B types) : 2 µA
FN 332: Performance EMI Filter

FN 332

Performance EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Rated currents from 1 to 10 A
  • Compact housing
  • Optional overvoltage protection (Z type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Leakage current : 340 µA
FN 343: Performance EMI Filter

FN 343

Performance EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 10 A
  • Dual-stage filter
  • Compact housing
  • Integrated earth line choke
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Leakage current : 0.734 to 0.867 mA
FN 350: Compact EMC/RFI Filter for Motor Drives

FN 350

Compact EMC/RFI Filter for Motor Drives

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Compact filter solution for single-phase motor drive applications
  • Industrial grade safety terminal blocks
  • Designed to meet EN 55011/14/22
  • Compliant with IEC 60950
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Leakage current : 4.9 to 11 mA
FN 351: General Purpose EMC Filter

UR / CSA: FN 351 up to 110 A; cCSAus: FN 351 H up to 110 A

FN 351

General Purpose EMC Filter

  • EMC/EMI Products
  •  » 3-Phase Filters
  • EMC solution for industrial inverters and motor drives
  • Rated currents from 8 to 280 A
  • Selectable voltage level of 440 V and 520 V
  • High differential and common-mode attenuation
Operating frequency : DC to 60 Hz
Rated current : 8 to 280 A
Attenuation performance : high
Voltage : ≤ 520 V
Leakage current : 1.9 to 42.9 mA
Motor power : 3 to 160 kW
FN 352 Z: Multi-stage EMI Filter

FN 352 Z

Multi-stage EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Three-Stage Filters
  • Rated currents from 6 to 30 A
  • Surge pulse protection up to 2 kA
  • Solder or screw connection
Operating frequency : DC to 400 Hz
Attenuation performance : very high
FN 354: Compact Three-phase and Neutral Line Filter for High Frequency Attenuation

FN 354

Compact Three-phase and Neutral Line Filter for High Frequency Attenuation

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Compact four-wire filter for applications with limited space
  • High attenuation performance up to 300 MHz
  • Equally suitable for star and delta power networks
Operating frequency : DC to 60 Hz
Attenuation performance : high
Leakage current : 0.175 to 0.5 mA
Rated current : 4 to 25 A
Voltage : ≤ 440 V
FN 355: Ultra-compact Low Leakage current EMC/EMI Filter

FN 355

Ultra-compact Low Leakage current EMC/EMI Filter

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Ultra-compact four-wire filter for applications lacking space
  • Exceptional low operating leakage current
  • Equally suitable for star and delta power networks
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 440 V
Rated current : 3 to 20 A
Leakage current : 0.07 to 0.29 mA
FN 356: General Purpose EMC/EMI Line Filter

(FN 356 up to 100 A)

FN 356

General Purpose EMC/EMI Line Filter

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Three-phase and neutral line filter for general four-wire filtering tasks
  • Choice of connection style
  • Low operating leakage current
  • Compliant with IEC 60950
  • Suitable to meet EN 55011/14/22
Attenuation performance : high
Leakage current : 0.43 to 8 mA
Operating frequency : 0 to 60 Hz
Rated current : 16 to 150 A
Voltage : ≤ 440 V
FN 370: Versatile Filtered Power Entry Module

FN 370

Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 6 A
  • Single or dual-fuse holder
  • Fuses Ø6.3 x 32 mm or Ø5 x 20 mm
  • Voltage selector 100/120/230/240 V
  • General purpose application
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Rated current : 2 to 6 A
Voltage : ≤ 250 V
Leakage current : 373 µA
Leakage current (B types) : 2 µA
FN 380: Versatile Filtered Power Entry Module

FN 380

Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 6 A
  • Single or dual-fuse holder
  • Fuses Ø6.3 x 32 mm Ø5 x 20 mm
  • 2-pole rocker switch
  • General purpose application
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 2 to 6 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 390: Versatile Filtered Power Entry Module

FN 390

Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 10 A
  • For one or two fuses
  • Fuses Ø6.3 x 32 mm or Ø5 x 20 mm
  • 2-pole rocker switch
  • Voltage selector
  • Optional earth line choke (E type)
Operating frequency : DC to 400 Hz
Attenuation performance : high
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current : 560 to 797 µA
FN 402: Low Cost PCB Filter

FN 402

Low Cost PCB Filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 0.5 to 6.5 A
  • Compact PCB-mountable design
  • Very low profile
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 0.5 to 6.5 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 405: PCB-mounting filter

FN 405

PCB-mounting filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 0.5 to 10 A
  • Compact PCB-mountable design
  • Low profile
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 0.5 to 10 A
Leakage current : 373 µA
FN 406: Ultra Compact EMC Filter

FN 406

Ultra Compact EMC Filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 0.5 to 8.4 A
  • Aluminium case
  • Very compact PCB-mountable design
  • Low profile
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 0.5 to 8.4 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 410: High Performance Two-stage PCB-mounting EMC Filter

FN 410

High Performance Two-stage PCB-mounting EMC Filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 0.5 to 6 A
  • High attenuation two-stage design
  • PCB-mountable design
Operating frequency : DC to 400 Hz
Attenuation performance : high
Leakage current : 373 µA
Rated current : 0.5 to 6 A
Voltage : ≤ 250 V
FN 700 Z: Three-stage EMC/EMI Filter

FN 700 Z

Three-stage EMC/EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Three-Stage Filters
  • Rated currents from 6 to 20 A
  • IEC inlet for 6 and 10 A versions
  • Up to 3 GHz attenuation
  • High surge voltage protection
Operating frequency : DC to 400 Hz
Attenuation performance : very high
FN 751X: AC Feedthrough Capacitor

FN 751X

AC Feedthrough Capacitor

  • EMC/EMI Products
  •  » Feedthrough Components
  •  » Capacitors
  • IEC/EN 60384-14 approval
  • Rated currents from 10 to 200 A
  • 5 kV pulse test capability
  • Class Y2 capacitor
Voltage : ≤ 300 V
Rated current : 10 to 200 A
Frequency : 50/60 Hz
Capacitance : 2.2 to 220 nF
Attenuation performance : high
Leakage current : 0.21 to 20.7 mA
Operating frequency : DC to 60 Hz
FN 756X: DC Feedthrough Capacitor

FN 756X

DC Feedthrough Capacitor

  • EMC/EMI Products
  •  » Feedthrough Components
  •  » Capacitors
  • EN/IEC 60384-14 approval
  • Rated currents from 10 to 200 A
  • 2.5 kV pulse test capability
  • Class Y4 capacitor
Rated current : 10 to 200 A
Leakage current : 0.49 to 230 mA
Capacitance : 10 to 4700 nF
Attenuation performance : high
Voltage : ≤ 130 V
FN 761X: AC Feedthrough Filter

FN 761X

AC Feedthrough Filter

  • EMC/EMI Products
  •  » Feedthrough Components
  •  » Filters
  • IEC/EN 60939 approval
  • Rated currents from 10 to 100 A
  • 5 kV pulse test capability
  • Class Y2 capacitor
Voltage : ≤ 300 V
Frequency : 50/60 Hz
Leakage current : 1.89 to 188 mA
Capacitance : 10 to 1000 nF
Rated current : 10 to 100 A
Attenuation performance : very high
Operating frequency : DC to 60 Hz
FN 766X: DC Feedthrough Filter

FN 766X

DC Feedthrough Filter

  • EMC/EMI Products
  •  » Feedthrough Components
  •  » Filters
  • IEC/EN 60939 approval
  • Rated currents from 10 to 200 A
  • 2.5 kV pulse test capability
  • Class Y4 capacitor
Leakage current : 0.98 to 460.7 mA
Capacitance : 10 to 4700 nF
Rated current : 10 to 200 A
Attenuation performance : very high
Voltage : ≤ 130 V
FN 3410: Ecosine 50 Hz Passive Harmonic Filters

FN 3410

Ecosine 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Full Performance Line (5% THID)
  • The industry standard for 6-pulse rectifiers and motor drives
  • The most compact 5% THID filter available
  • Excellent behavior under partial load conditions
  • Filters for diode rectifiers
THID : <5%
Frequency : 50 Hz
FN 3410 HV 690: Ecosine 50 Hz Passive Harmonic Filters

FN 3410 HV 690

Ecosine 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » HV Line (5% THID)
  • Filters for 3-phase diode and SCR rectifiers
  • The industry standard for AC and DC and motor drives
  • The most compact 5% THID filter available
  • Excellent behavior under partial load conditions
THID : <5%, ~5% (with LDC)
Frequency : 50 Hz
FN 3410 (IP 00): Ecosine high power passive harmonic filter modules for system integration

FN 3410 (IP 00)

Ecosine high power passive harmonic filter modules for system integration

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Modular and highly compact filter concept
  • Cost-effective open panel design for cabinet integration
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for diode rectifiers
THID : ~5% (with LDC)
Frequency : 50 Hz
FN 3411: Ecosine 50Hz Passive Harmonic Filters

FN 3411

Ecosine 50Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Full Performance Line (5% THID)
  • The industry standard for 6-pulse rectifiers and motor drives
  • Excellent behavior under partial load conditions
  • Filters for thyristor (SCR) rectifiers
THID : depending upon firing angle
Frequency : 50 Hz
FN 3411 (IP 00): Ecosine high power passive harmonic filter modules for system integration

FN 3411 (IP 00)

Ecosine high power passive harmonic filter modules for system integration

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Modular and highly compact filter concept
  • Cost-effective open panel design for cabinet integration
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for thyristor (SCR) rectifiers
THID : depending upon firing angle
Frequency : 50 Hz
FN 3412: Ecosine 60 Hz Passive Harmonic Filters

FN 3412

Ecosine 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Full Performance Line (5% THID)
  • The industry standard for 6-pulse rectifiers and motor drives
  • The most compact 5% THID filter available
  • Excellent behavior under partial load conditions
  • Filters for diode rectifiers
THID : <5%
Frequency : 60 Hz
FN 3412 (IP 00): Ecosine high power passive harmonic filter modules for system integration

FN 3412 (IP 00)

Ecosine high power passive harmonic filter modules for system integration

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Modular and highly compact filter concept
  • Cost-effective open panel design for cabinet integration
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for diode rectifiers
THID : ~5% (with LDC)
Frequency : 60 Hz
FN 3413: Ecosine 60 Hz Passive Harmonic Filters

FN 3413

Ecosine 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Full Performance Line (5% THID)
  • The industry standard for 6-pulse rectifiers and motor drives
  • Excellent behavior under partial load conditions
  • Filters for thyristor (SCR) rectifiers
THID : depending upon firing angle
Frequency : 60 Hz
FN 3413 (IP 00): Ecosine high power passive harmonic filter modules for system integration

FN 3413 (IP 00)

Ecosine high power passive harmonic filter modules for system integration

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Modular and highly compact filter concept
  • Cost-effective open panel design for cabinet integration
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for thyristor (SCR) rectifiers
THID : depending upon firing angle
Frequency : 60 Hz
FN 3416: Ecosine Compact Economy Line of Passive Harmonic Filters

FN 3416

Ecosine Compact Economy Line of Passive Harmonic Filters

  • Ecosine passive
  •  » Economy Line (10% THID)
  • Economy line of passive harmonic filters for THID <10%
  • Help to comply with EN 61000-3-12, IEEE-519 and other PQ standards
  • Support an efficient utilization of electrical system capacity
  • Ideal for motor drives with 6-pulse rectifier front-end
  • Suitable for diode and thyristor (SCR) rectifiers applications
Frequency : 50 Hz
THID : <10%
FN 3416 LV: Ecosine Low-Voltage Economy Line of Passive Harmonic Filters

FN 3416 LV

Ecosine Low-Voltage Economy Line of Passive Harmonic Filters

  • Ecosine passive
  •  » Economy Line (10% THID)
  • Economy line of passive harmonic filters for THID <7%
  • Help to comply with EN 61000-3-12, IEEE-519 and other PQ standards
  • Support an efficient utilization of electrical system capacity
  • Ideal for AC or DC motor drives with 6-pulse rectifier front-end
  • Suitable for 200-240 V diode and thyristor (SCR) rectifiers applications
Frequency : 50 Hz
THID : all
FN 3418: Ecosine Compact Economy Line of Passive Harmonic Filters

FN 3418

Ecosine Compact Economy Line of Passive Harmonic Filters

  • Ecosine passive
  •  » Economy Line (10% THID)
  • Economy line of passive harmonic filters for THID <10%
  • Help to comply with EN 61000-3-12, IEEE-519 and other PQ standards
  • Support an efficient utilization of electrical system capacity
  • Ideal for motor drives with 6-pulse rectifier front-end
  • Suitable for diode and thyristor (SCR) rectifiers applications
Frequency : 60 Hz
THID : <10%
FN 3418 LV: Ecosine Low-Voltage Economy Line of Passive Harmonic Filters

FN 3418 LV

Ecosine Low-Voltage Economy Line of Passive Harmonic Filters

  • Ecosine passive
  •  » Economy Line (10% THID)
  • Economy line of passive harmonic filters for THID <7%
  • Help to comply with EN 61000-3-12, IEEE-519 and other PQ standards
  • Support an efficient utilization of electrical system capacity
  • Ideal for AC or DV motor drives with 6-pulse rectifier front-end
  • Suitable for 200-240 V diode and thyristor (SCR) rectifiers applications
Frequency : 60 Hz
THID : <10%
FN 5020: Sine wave output filter for high-speed motor drives

FN 5020

Sine wave output filter for high-speed motor drives

  • Output filters
  •  » Sine wave filters
  • Smoothing of PWM drive output voltages
  • Increased service life of expensive high-speed motors
  • Reduction of audible motor noise
  • Improvement of system reliability
  • Production up-time for mission critical applications
Motor frequency : 0 to 600 Hz
Switching frequency : 6 to 15 kHz
Rated current : 25 to 120 A
Motor cable length : ≤200 m
Motor power : 15 to 75 kW
Voltage : 0 to 500 V
FN 5030: Add-on Sine Wave Module for Common-mode Voltage Improvement

FN 5030

Add-on Sine Wave Module for Common-mode Voltage Improvement

  • Output filters
  •  » Sine wave plus filters
  • Additional module for use with FN 5020 and FN5040/45 sine wave filters
  • Reduction of common-mode interferences on motor cables
  • Improvement of EMC environment
  • Elimination of motor bearing damages
  • Possibility to use very long unshielded motor cables
  • Improvement of system reliability
Motor frequency : 0 to 600 Hz
Switching frequency : 6 to 15 kHz
Rated current : 25 to 120 A
Motor cable length : ≤1000 m
Motor power : 15 to 75 kW
Voltage : 0 to 500 V
FN 5040/FN 5045: LC Sine Wave Filter for Motor Drives

UL 61800-5-1 up to 750 A for FN 5040, 480 A for FN 5045. For use with AC or DC drives (power conversion equipment) only

FN 5040/FN 5045

LC Sine Wave Filter for Motor Drives

  • Output filters
  •  » Sine wave filters
  • Smooth sine wave without voltage peaks
  • Perfect motor protection
  • Reduce bearing currents
  • Motor frequency up to 200 Hz
  • Extended motor cable length capability
Motor frequency : 0 to 70 Hz
Switching frequency : 2 to 12 kHz
Rated current : 4.5 to 1200 A
Motor cable length : ≤2000 m
Motor power : 1.1 to 630 kW
Voltage : 0 to 500 V
FN 5040 HV: LC Sine Wave Filter for 600 VAC and 690 VAC Motor Drives Applications

(UL up to 300 A)

FN 5040 HV

LC Sine Wave Filter for 600 VAC and 690 VAC Motor Drives Applications

  • Output filters
  •  » Sine wave filters
  • Smooth sine wave without voltage peaks
  • Motor protection against pulse pattern stress
  • Improvement of system reliability
  • Reduces bearing currents
  • Ideal for retrofit installations
  • Fits for long motor cable lengths (≤2000 m)
  • Motor drive power range up to 1,200 kW
Motor frequency : 0 to 70
Motor cable length : ≤2000 m
Switching frequency : 2 to 16 kHz
Motor power : 7.5 to 1200 kW
Rated current : 13 to 1320 A
Voltage : 0 to 690 V
FN 5060: Output Filter for Motor Drives

UL recognized up to 700 A

FN 5060

Output Filter for Motor Drives

  • Output filters
  •  » dv/dt filters
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability
Rated current : 12 to 1100 A
Motor frequency : 0 to 60 Hz
Motor power : 5.5 to 630 kW
Switching frequency : 2 to 16 kHz
Voltage : 0 to 500 V
Motor cable length : ≤80 m
FN 5060 HV: Output Filter for Motor Drives

UL recognized up to 320 A

FN 5060 HV

Output Filter for Motor Drives

  • Output filters
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability
Rated current : 30 to 1200 A
Motor cable length : ≤80 m
Motor frequency : 0 to 60 Hz
Motor power : 15 to 1000 kW
Switching frequency : 0 to 16 kHz
Voltage : 0 to 760 V
FN 510: Output Filter for Motor Drives

FN 510

Output Filter for Motor Drives

  • Output filters
  •  » dv/dt filters
  • Reduction of drive output voltage dv/dt
  • Restriction of overvoltages on motor cables
  • Reduction of motor temperature
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 400 Hz
Motor power : 1.5 to 30 kW
Rated current : 4 to 66 A
Switching frequency : 2 to 16 kHz
Voltage : 380 to 500 V
FN 530: Sine Wave and EMC Output Filter for Motor Drives with a DC Link Access

FN 530

Sine Wave and EMC Output Filter for Motor Drives with a DC Link Access

  • Output filters
  •  » Sine wave plus filters
  • Smoothing of PWM drive output voltage
  • Efficient motor protection
  • Reduction of common-mode interferences on motor cables
  • Improvement of EMC environment
  • Elimination of motor bearing damages
  • Possibility to use very long unshielded motor cables
  • Improvement of system reliability
Motor frequency : 0 to 200 Hz
Switching frequency : 6 to 20 kHz
Rated current : 4 to 16 A
Motor cable length : ≤1000 m
Motor power : 1.5 to 7.5 kW
Voltage : 0 to 520 V
RWK 212: 3-phase Line Reactor for Motor Drive & Power Quality Applications

UL 508C up to 400 A. For use with AC or DC drives (power conversion equipment) only

RWK 212

3-phase Line Reactor for Motor Drive & Power Quality Applications

  • Reactors
  •  » AC Line Reactors
  • Provision of 4% impedance
  • Reduction of mains harmonics
  • Reduction of commutation notches
  • Protection of motor drive electronics
  • Limitation of inrush currents
  • Improvement of true power factor
Impedance : 4% @ 400 VAC, 50 Hz & rated current
Voltage : ≤ 500 V
THID : appr. 40%
Frequency : 50 to 60 Hz
Motor power : 1.5 to 830 W
Rated current : 4 to 1500 A
RWK 305: Three-phase dv/dt Reactor for Efficient Motor Protection

UL 508C up to 182 A. For use with AC or DC drives (power conversion equipment) only

RWK 305

Three-phase dv/dt Reactor for Efficient Motor Protection

  • Reactors
  •  » Load reactors
  • Reduction of drive output voltage dv/dt
  • Reduction of motor temperature
  • Increase of motor service life
  • Compact and economic open frame design
  • Standard catalog reactors up to 1100 A
  • UL rated materials used
Motor cable length : ≤50 m
Motor frequency : 0 to 60 Hz
Motor power : 1.5 to 630 kW
Rated current : 4 to 1100 A
Switching frequency : 2 to 16 kHz
Voltage : 380 to 500 V
drop objects here